Tools
Ball Tipped Lens Clock
For precise curvature measurements on glass and plastic lenses. Features include rounded metal tips, adjustable calibration and readings to ±20 diopters.
WT-2068
Concorde Side Cutter
When only the best will do.
Military grade material coupled with sleek design features and ultimate caftsmanship. Comfortable in the hand and easy to control for precision surgical cuts. Blades are kept fresh by manually adjusting the blade gap. Side cutting poins comes to a sharp focus so that you comfortably reach into claustrophobic areas to cut any type of screw.
WT-5026
Dial Caliper
Manufactured by Moore & Wright from reinforced nylon. Shockproof dial is adjustable to zero. 0.1mm graduations on dial, metric and imperial graduations on rule. Four way measurement (outside, inside, depth and step). Very high quality piece of engineering.
TO-001
Dispensing PD Rule
Millimetre graduations read in the same direction for accurate seg height and PD measuring. 178mm.
TO-063
Driver Blades
Spare driver blades that will fit both the Stealth and the Driveshaft drivers supplied in packs of 2:
- Standard / Narrow - WT-2090
- Flat Fine Tip - WT-2091
- Phillips - WT-2092
- Phillips / Flat - WT-2095
- Screw Extractor - WT-2093
- Star Nut 2.2mm - WT-2096
- Star Nut 2.8mm - WT-2097
- Standard Hex Nut - WT-2094
Driveshaft Drivers
A set of 5 Driveshaft Drivers with various blades. They are comfortable and attractive. The non-wearing nylon construction prevents the swivel cap from binding up and the hardened metal blade from falling out.
With or without cushions
WT-2046
Laboratory mm Rule
The ends of this rule are notched for easy and accurate eyewire readings. 178mm.
TO-065
Lens Thickness Gauge
The Lens Thickness Gauge from Inland is an exceptionally high quality product. It can be used on lenses up to 86mm in diameter. Readings are accurate to 0.1mm. The points are plastic tipped to protect lenses. Overall length 190mm.
WT-2060
Magnetic Tool Bar
Frees up valuable counter space. Magnetic grip takes strong hold of tools. 300mm length.
WT-2178
Manual Monocular Pupilometer
The quick and easy way to take highly accurate monocular and binocular ODs for more precise prescription measuring. All acrylic construction. (Head not included).
WT-2061
Metal Plier Stand
This is a simple metal plier stand. Your pliers just sit on top.
Free on request with orders of three or more pliers!!!
TO-STD
Plastic Tweezer
Non-scratching tweezer, excellent for processes involving mild acid solutions.
TW-002
Plier Chain Nose Nylon Plier
Excellent all-round adjustment tool. Flat metal jaw tapers to a fine point to adjust in tight areas while nylon jaw prevents scratching of frames.
WT-2013
Plier Curved Tip Chain Nose
Angled jaws make it easy to reach into the tight areas of pad arms.
WT-2039
Plier Deblocking
Removes suckers and universal flat pads with heel diameter 16mm (Essilor / Weco).
WT-2005
Plier Double Nylon Jaw
Non-marring, long lasting nylon jaws for holding or bracing. Will not damage frames.
WT-2015
Plier Finger Piece
Securley grips end pieces to modify temple angle and adjust finger piece mountings. recessed holes in jaw.
WT-2045
Plier Lens Aligning
48mm deep jaws for aligning any size mounted lens. Cups are riveted to prevent pads from turning or flipping over.
WT-2029
Plier Metal Eyewire Forming
Gently but firmly reshapes metal eyewire to conform to base curve oflens. Non-marring nylon jaws.
WT-2010
Plier Narrow End Flush Cutting
Cutting the excess length from rimless compression tubing is easy and safe with the 5mm wide head.
Rounded jaws prevent the lens from scratching. Provides clean, flush cuts on rimless mounting screws or eyewire screws in a tight spot.
Not for use on extra hard metals.
WT-1027
Plier Nose Pad Adjusting
The secure way to adjust ose pads and arms Cupped and slotted jaws securely cradle pad assemly. New design makes adjustment safe and easy.
WT-2030
Plier Oblique Head End Cutter
Heavy duty niper cuts screws and rivets fush. Head tapers to a fine point. The head is slightly angled for easy accessibility.
WT-2025
Plier Side Cutter
Narrow head on this nipper allows easy access to hrd to reach screws. Not intended for stainless steel screws.
WT-2026
Plier Temple Bending
A range of stepped Delrin plastic arcs aid you in easily curving end pieces on temples. Obtain the most comfortable and individualised for for your patient.
WT-2004
Plier Wide Jaw Angling
Used to adjust angle of temple to the frame front. Opens wide to accommodate large temples. Hole in jaws protects end of screw.
WT-2009
Plier ZYL Gripper
Used for angling temples on plastic frames while protecting the hinge (Stepped metal Jaw) and shield Nylon jaw).
WT-2017
Self Closing Fine-Tip Tweezers
The delicate point and the sturdy stainless spring action of this tweezer securely holds even the smallest screws. 140mm long.
TW-001
Self Tightening Screw Starter
Ideal tool for starting or removing hard to handle screws. Grips the screw tighter as you apply pressure.
WT-2056
ShootOut
The Shootout is the engineering solution for all aspects of hinge and eyewire screw maintenance. By providing the maximum power available in a hand tool without sacrificing the necessary control, the Shootout is fast becoming a vital tool in every practice. It is comfortable to grip for even the smallest of hands.
EASY TO USE
QUICK
EFFECTIVE
The Shootout Screw Ejector squeezes screws out of the barrel easily and quickly.
The Shootout Screw Riveting Set stops screws from backing out of hinges.
The Shootout Hinge Riveting Set enables rivets to be inserted into frames.
The Shootout Screw Slotting Set creates slots in damaged screw heads.
Supplied complete with one of each of the 10 points and anvils.
WT-2042
ShootOut Spare Parts
| 2.0mm Hollow Anvil (Blue Dot) for Shootout! | WT-2042A |
| 2.7mm Hollow Anvil (Green Dot) for Shootout! | WT-2042B |
| 3.0mm Hollow Anvil (Red Dot) for Shootout! | WT-2042C |
| Hinge Screw Ejector Point for Shootout! | WT-2042D |
| Solid Anvil for Shootout! | WT-2042E |
| Flaring Point for Shootout! | WT-2042F |
| Eyewire Screw Ejector Point for Shootout! | WT-2042G |
| Short Hollow Eyewire Anvil for Shootout! | WT-2042H |
| Cupped Point for Shootout! | WT-2042J |
| Screw Slotting Point for Shootout! | WT-2042K |
| Silver Rivets (pack of 100) | WT-2042X |
| Gold Rivets (pack of 100) | WT-2042Y |
| Gunmetal Rivets (pack of 100) | WT-2042Z |
Stealth Drivers
The Stealth Driver from Inland is the most comfortable driver ever! The head always swivels to seat securely in the palm of your hand. The ergonomic design eliminates wrist fatigue. Blades are held in place magnetically. With its steel and brass construction, the Stealth is also extremely durable.
WT-2050
Strain Viewer
Strain Viewers can be used to detect faults and check for even tensions in all lenses.
ISV-01
Tube Refresher
A handy tool for opening the compression rimless tube to make inserting the post easier.
The squeezing action of tube cutters sightly collapse the end of the ube aking it difficult to get the posts into position prior to compressing.
WT-2085
Universal Nut Grabber
With the sizes and shapes of lock nuts changing so does your collection of nut drivers.
This tool will end your search for one that fits your nut as this universal nut grabber's expandable jaws grip any size or shape nut.
WT-5070