Lens & Frame Care
Anti-Reflex Coating Stripper
Removes old or defective A-R coatings in seconds
Inland’s Anti-Reflex Coating Stripper is an easy way to remove A-R coatings quickly. Unwanted or damaged coatings can be removed in as little as 25 seconds. Lenses can then be tinted or recoated.
Anti-Reflex Coating Stripper is a cold dip solution.
No heating is required.
Please note that this solution is not suitable for glass lenses.
1 Litre AR-002
250ml AR-001
Markaway
Removes lens marker paint and permanent markers, it will also take off markings on proression lenses. Dissolves inks, body oils, grease and a lot of other hard to clean objects.
This product DOES NOT CONTAIN ACETONE or any other frame / lens damaging solvents. Safe for polycarbonate and high index lenses including edges.
250ml with spray MA-250S (NEW SIZE!!)
500ml MA-500
4 Litre MA-4LT
500ml with spray MA-500S
Omni Guard
Omni Guard is an excellent scratch resistant coating, which features anti-static and anti-fod properties. The coating is easily applied in a standard tint unit, operates at the same temperature as Inland's tints, UVs and neutralisers. Lenses should be treated for between 15 and 30 minutes, and each bottle will treat up to 200 pairs of lenses.
250ml concentrate AS-101
P.S.P.
Do you have a problem with splitting and starring from the drilled holes in polycarbonate?
With one drop of P.S.P all is solved.
It seals and polishes the holes minimising any cracking. 25ml
GZ-PSP
Polycarbonate Edge Polish
Polishes polycarbonate edges in seconds! Acting in a similar way to acetone, the uneven edges of the lens dissolve leaving an instant shine. The drying process is instantaneous. 500ml bottle.
GZ-121
Super Hydrophobic Solution
Super Hydrophobic works on CR39, polycarbonate and Hi-Index anti-reflex coated lenses. This water repellent solution protects A-R coated lenses from smudging and spotting and makes them easier to clean.
Super Hydrophobic is a straightforward cold-dip with no machinery or ovens involved. In addition, the new formula has anti-fog, anti-static and anti-scratch properties like Super Scratch Guard (see opposite).
Each bottle treats approximately 175 pairs of lenses.
Please note Super Hydrophobic has a shelf life of 3 months
AR-102
Manufactured by OMS Opto Chemicals
Super Scratch Guard
The ONE SECOND Anti-Scratch treatment with Anti-Static and Anti-Fog properties.
Super Scratch Guard is a simple and easy way to apply a scratch coating. All there is to do is to dip the clean pre-treated lens for one second in the Super Scratch Guard solution. Remove it, shake off excess droplets and dry the lens with a Kleenex. You have now applied an ultra-slick silicon layer to the surface of the lens. The slickness of the layer will let objects slide off the surface instead of hooking on and scratching them. In addition, the anti-scratch properties will prevent the lens from attracting dust. The anti-fog features will dissipate fogging within seconds. Your patients get maximum value and benefits from the Super Scratch Guard coating.
Please note Super Scratch Guard has a shelf life of 3 months.
AS-001
Super Scratch Guard Primer
This primer is used before you use the Super Scratch Guard to make sure the lens is totally clean thus allowing the lens to be treated in the best way.
AS-002
Ultrasonic Cleaning Fluid
Highly concentrated cleaning fluid for Ultrasonic Cleaning Units. 250ml size is supplied in a dispenser bottle.
1 Litre US-002
250ml US-001
5 Litres US-005